Print Page - After some glass or perspex

Title: After some glass or perspex - 10mm or bigger
Post by: on March 17, 2006, 07:07:52 PM

Hey all,

Im after some peices of glass or perspex 10mm or thicker, about 600x400. After at least two. Or a sheet that i can cut down, maybe someone with an old smashed 4x2 i can rescue.

Let me know.

Cheers,

Title:
Post by: wrk21 on March 17, 2006, 07:50:42 PM

bud what are you doing with it?????

Title:
Post by: Ash on March 17, 2006, 09:13:25 PM

some glasiers use 10mm as standard for shopfronts & might have 2nd hand bits cheap - have you rang a few of them or are you looking for cheaper still?

I'm curious about it too - plywood tank with one viewable side perhaps?

I want to build an above ground pond/tank hybrid with an ~8'x2.5' viewing panel one day, need perspex being outdoors & paranoid about mowing. :oops:

Title:
Post by: on March 17, 2006, 09:36:00 PM

I have a 1.5 x 600 x 500 fibreglass tank, I want to put two viewing windows in the front of it, the reason for the two smaller peices is that there is a steel support through the middle, so im going to leave the middle support fibreglass.

Title: perspex
Post by: OPM069 on March 18, 2006, 11:13:11 AM

hi

u have a pm

opm069 :D

Title: glass
Post by: Savage_roo on March 18, 2006, 06:52:25 PM

Hi i would give Gjames a call at (gebung?) they aiways have off cuts and they can sell them cheep
Good luck

Title:
Post by: on March 18, 2006, 08:37:00 PM

Cheers guys.

QLD Cichlid Group Forum

Fish talk => General Aquarium Discussion => Topic started by: on March 17, 2006, 07:07:52 PM